BFXCW - PHOTICA 1605 FIXER HARDENER,PART B
- MSDS: BFXCW
- Manufacturer: PHOTICA INC
- Product Name: PHOTICA 1605 FIXER HARDENER,PART B
- National Stock Number: 6750-00-929-8101
Product Identification
Product ID:PHOTICA 1605 FIXER HARDENER,PART B
MSDS Date:01/01/1985
FSC:6750
NIIN:00-929-8101
Kit Part:Y
MSDS Number: BFXCW
Responsible Party
IRVINGTON, NJ 07111-4717
US
Cage: LO086
Contractor
Telephone: 201-705-9553
Cage: LO086
Ingredients
ALUMINUM SULFATE (SARA III)
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: 30%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SULFURIC ACID (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 3%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED
Fraction By Weight: 67%
Hazards
Effects of Overexposure:CONTACT WITH ANY TISSUE CAN CAUSE IRRITATION.
First Aid
First Aid:WASH CONTACTED SKIN THOROUGHLY WITH SOAP & WATER.FOR
EYES,IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES &
OBTAIN MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:EXTINQUISH W. AGENT SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:ITEM IS A NON-COMBUSTIBLE LIQUID
Unusual Fire/Explosion Hazard:MFR INDICATES:NONE
Accidental Release
Spill Release Procedures:WEARING GOGGLES & RUBBER GLOVES,MOP-UP SPILL
WITH ABSORBENT MATERIAL.RINSE & MOP SOILED AREA WITH FRESH AIR.
Handling
Handling and Storage Precautions:STORE CONTAINERS IN DRY AREA NOT BELOW
40F(4C) OR ABOVE 85F(30C).
Exposure Controls
Respiratory Protection:AS APPROPRIATE FOR SITUATION
Ventilation:SUFFICIENT & OF TYPE TO MAINTAIN AIR QUALITY BELOW TLV
Protective Gloves:RUBBER TYPE
Eye Protection:CHEMICAL TYPE PROTECTION
Other Protective Equipment:AS REQUIRED BY LOCAL PROCEDURES
Supplemental Safety and Health
PH IS 1.52;KEY1:C1.
Chemical Properties
HCC:C1
Spec Gravity:1.305
Solubility in Water:COMPLETE
Appearance and Odor:NO INFORMATION FOUND,PH 1.52
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES,FLAMMABLES,OXIDIZERS
Stability Condition to Avoid:SITUATION FOR ACCIDENTAL MIXTURE W/BASES
Hazardous Decomposition Products:SULFR DIOXIDE
Disposal
Waste Disposal Methods:DIRECT WASTE,SPENT OR EXCESS HARDENER TO
AUTHORIZED DRAIN SITE WITH COPIOUS AMOUNTS OF WATER.OBSERVE
APPROPRIATE FEDERAL,STATE,& LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.